Free Shipping & Returns | Lifetime Warranty | Ethically Sourced Diamonds
Home Rings Necklaces Earrings Bracelets Diamond Education Our Story Contact Get a Quote

Ultrasonic Cleaning: Which Jewelry Can Go In, and Which Cannot

An ultrasonic cleaner can make a diamond ring look new in five minutes, and it can destroy a pearl, an opal or a fracture-filled stone in the same five minutes. This is the safe list, the never list and the routine we recommend.

How an Ultrasonic Cleaner Works

The machine drives a metal basket at roughly 40 to 45 kHz, creating millions of tiny bubbles that collapse against the jewelry and lift grease out of crevices. It is excellent for the underside of a diamond, where soap and a brush cannot reach. It does not remove scratches, restore worn prongs or fix a dull stone. Vibration and heat are the two side effects that matter, because both can loosen a stone or break a fragile gem.

Safe and Unsafe Materials

MaterialSafe?Why
Diamond, CZ, moissaniteYesHard and stable; the basket protects the setting
Sapphire, ruby (untreated)Yes, brieflyHard enough, but check for fracture filling first
Emerald, opal, pearl, turquoise, coral, amber, lapisNoPorous or soft; vibration and water cause cracks, crazing or loss of polish
Fracture-filled diamondNoHeat and vibration can damage the resin filler
Glued settings, cameos, rhinestonesNoAdhesive softens and stones fall out

A Safe Routine

Fill the tank with warm water and one drop of mild dish soap, never household cleaner. Put the piece in the basket so it does not touch the tank floor, run three to five minutes, rinse under warm water and dry with a lint-free cloth. Inspect every stone afterwards with a toothpick. Skip the machine entirely for antique hollow work, cameos and anything with glued stones: a soft brush and a bowl of soapy water are safer. If a stone is loose before cleaning, fix it first, because the cleaner will finish the job.

For pieces that should not go in a machine, see our gemstone care guide or ask us on WhatsApp.

Ready to Find Your Perfect Piece?

Factory-direct pricing from our Panyu, Guangzhou workshop. Our team will reply within 24 hours with pricing and availability.

Get a Free Quote Chat on WhatsApp

Shop Rings  ·  Shop Necklaces  ·  Shop Earrings

Frequently Asked Questions

Can I put a whole ring in an ultrasonic cleaner?

Only if every stone is diamond, CZ, moissanite or an untreated hard gem, and the setting is metal-only. A single pearl, opal or glued side stone makes the whole piece unsafe.

How often should I use an ultrasonic cleaner?

Once a month for a ring worn daily is enough. More frequent cleaning does not hurt diamond, but it increases the chance of loosening a prong over time.

Does an ultrasonic cleaner sanitize jewelry?

It removes dirt and grease, which reduces bacteria, but it is not a sterilizer. For pierced-ear jewelry, clean with an alcohol wipe after the ultrasonic bath.