Free Shipping & Returns | Lifetime Warranty | Ethically Sourced Diamonds
Home Rings Necklaces Earrings Bracelets Diamond Education Our Story Contact Get a Quote

Prong Retipping: When a Claw Wears Down and What to Do About It

A worn prong is the most common reason a stone goes missing, and it is almost invisible from above. This guide explains how prongs wear, how to check them at home, and what retipping or rebuilding actually involves.

Why Prongs Wear

A prong is a thin piece of metal holding a stone by a few tenths of a millimeter. Daily wear polishes the tip, snagging on knitwear bends it, and chlorine in pools makes white gold prongs brittle. A ring sized down too aggressively puts stress on the head, and a stone that is loose rocks against the prongs and grinds them thinner from the inside. After five to ten years of daily wear, most rings need at least a check; after fifteen, retipping is common. The failure is rarely sudden: the tip rounds off, then a crack appears at the bend, then the stone shifts and one day it is gone.

Checking at Home

What you seeWhat it meansAction
Tip looks flat or roundedMetal worn awayRetip at next service
Stone rocks when pressedProngs loose or bentStop wearing; tighten now
Hair catches on a clawBurr or bendPolish or reshape the tip
Dark line at the prong baseCrack startingRebuild the head, not just the tip
Stone sits off-centerOne prong has failedRemove the stone and inspect immediately

Repair Options and Cost

Retipping adds metal to the existing tip and reshapes it; it is the cheapest fix and works when the base of the prong is sound. Prong replacement cuts off the old prong and solders a new one, which is needed when the base is cracked. Head rebuild replaces the whole basket, used when several prongs fail or the gallery is distorted. Expect a bench fee per prong, with a full rebuild costing several times a single retip; white gold usually needs re-plating afterward. Downtime is typically one to three weeks, and most jewelers will check the setting for free. Do not wear a ring with a rocking stone while you wait, and never try to bend a prong back with pliers at home: work-hardened metal cracks.

Book a setting check or send a close-up photo of the prongs to WhatsApp for an initial assessment.

Ready to Find Your Perfect Piece?

Factory-direct pricing from our Panyu, Guangzhou workshop. Our team will reply within 24 hours with pricing and availability.

Get a Free Quote Chat on WhatsApp

Shop Rings  ·  Shop Necklaces  ·  Shop Earrings

Frequently Asked Questions

How often should prongs be checked?

Once a year for a ring worn daily, and before any long trip or after any hard knock. A jeweler can feel a loose stone in seconds, which is far cheaper than replacing it.

Can I fix a bent prong myself?

No. Bending work-hardened metal at home usually cracks it, and pliers mark the surface. A bench can reshape or replace the prong for far less than a lost stone.

Does insurance cover retipping?

Usually not, because it is maintenance rather than a loss event. Insurance covers theft and damage; retipping is a routine service cost, typically modest per prong.